4) If there is a long rest time for the device, in case of the damage made by overuse of
battery, please make sure that you charge and discharge the device at least once
5 Installation of USB Drive
The installation is only needed for windows98 and windows 98 se computers. The steps
are as follows:
1) Insert the accessory CD into the CD drive and it will work automatically. The
interface shows as follows.
2) Click <Install>, and finish the installation of the drive with clues. The restart of the
computer is needed afterward.
Confirmation of the installation of USB drive
1) Turn on MP340, and connect it by the USB cable to the computer
2) Choose "Control Panel","Syetem", and enter "Device Manager", it will show as
3) Choose "Disk drives" and the installed USB drive will display
Attention: if it doesn't show as upward, then please uninstall your USB drive and reinstall