Charging The Batteries; Installation Of Usb Drive - Acer MP200 User Manual

4 Charging the Batteries

1) This device has the built-in Li battery and the user can charge the battery by using
the accessory charger. No matter turning on or off, the battery will be charging
when the charger connects it to the live power.
2) If the battery indicator shows one grid or no grid, it means lacking the power and
charging is needed.
3) In order to last the battery life, it is recommended to discharge the battery
completely before charging during the first two times of charging.
4) If there is a long rest time for the device, in case of the damage made by overuse of
battery, please make sure that you charge and discharge the device at least once
a month

5 Installation of USB Drive

The installation is only needed for windows98 and windows98 se computers. The steps are
as follows:
1) Insert the accessory CD into the CD-ROM and it will work automatically. The
interface shows as follows.
2) Click <Install>, and finish the installation of the drive with clues. The restart of the
computer is needed afterward.
Confirmation of the installation of USB drive
1) Turn on MP200, and connect it by the USB cable to the computer
2) Choose "Control Panel", "System", and enter "Device Manager", it will show as
follows;
4