5-2-5. Digital DT System Check (C05: DIGITAL DT CHECK)
This section describes the "C05: DIGITAL DT CHECK" mode.
C050: DT DRIVER CHECK
Checks the bimorph drive control circuit by the
loopback in a bimorph drive amplifier.
For more details, refer to page 5-30.
C051: SG LOOP CHECK
Checks the feedback loop of the strain gauge.
For more details, refer to page 5-31.
*C0:SERVO/DT CHECK
MENU
SET
*C05:DIGITAL DT CHECK
DIGITAL DT CHECK
C050:DT DRIVER CHECK
*No operation
Start auto check
DIGITAL DT CHECK
C051:SG LOOP CHECK
*No operation
Start auto check
5-2. Servo/DT System Check Mode
DIGITAL DT CHECK
*C050:DT DRIVER CHECK
C051:SG LOOP CHECK
SET
MENU
C050
SET
MENU
C051
SET
MENU
5-29