Table of Contents
Advertisement
4-2-6. Tape Running System and Tape Cleaner Cleaning
Warning
The tape cleaner has a sharp edge. Do not touch the edge with bare hands. Pay careful attention when
cleaning the tape cleaner.
Tools
• Cleaning cloth:
3-184-527-01
• Cleaning fluid:
9-919-573-01
Procedures
1. Pass a piece of paper approximately this manual's paper thick through the clearance of the tape cleaner
from top to bottom four or five times. At this time, do not move the paper from bottom to top.
w
Do not touch the edge portion of the tape cleaner with bare hands.
2. Clean the tape running surfaces (shaded portions in the figure) of each guide with cleaning cloth
moistened with a cleaning fluid.
3. After cleaning, clean it with a dry cleaning cloth two or three times.
TG-6
Pinch roller
TG-5
TG-0
Tape cleaner
TG-2
(Entrance guide)
Capstan
TG-1
(S-TEN)
Tape Running System and Tape Cleaner Cleaning
TG-4
TG-7
TG-3 (Exit guide)
4-2. Cleaning
TG-8
(T-TEN)
TG-9
Slant guide
TG-10
4-11
Advertisement
Table of Contents
