Removal/Installation Of Plate Md - Sony DVW-522 Maintenance Manual

2-2-2. Removal/Installation of Plate MD

Removal
1. Remove the upper lid. (Refer to Section 2-2-1.)
2. Slide the knobs of the plate MD each in the direction
indicated by the arrows (inside).
Knob
Sliding of the Knob Positions
3. Remove the plate MD.
Plate MD
Knob
Installation
4. Insert the plate MD into the clearance shown in the
figure.
n
Be careful not to put the harness under the plate MD in
this case.
Removal/Installation of Plate MD
5. Slide the knobs of the plate MD each in the direction
indicated by the arrows (outside), then fix.
Knob
Fixing of the Plate MD
6. Install the upper lid.
2-2. Removal/Installation of Cabinet
Plate MD
Harness
Plate MD
Knob
2-3