Sony DVW-522 Maintenance Manual page 119

Digital videocassette player, control panel extension kit, control panel case
Hide thumbs Also See for DVW-522:
Table of Contents

Advertisement

c) C42: RS-232C STATUS
ISR use
Displays the RS-232C port status, and sets the baud rate and flow control
requisite for the ISR.
Setting (Baud rate or Flow control)
(1) Align "*" mark with the item to be set using the search dial(JOG mode).
(2) To display the desire setting, trun the search dial while pressing the JOG
button.
(3) Press the SET button (or switch S300 on the SS board). Setting is then
completed.
The display description is shown below.
1 Selects the buad rate from the followings.
1200, 2400, 4800, 9600, 19.2K (bps)
2 Selects/changes the flow control of transmitting side from the followings.
H/W
;
XOFF
;
H/W,XOFF ;
3 Protcol state indication
ISR x[yyyy...........]
• Displays last correctly recieving command
(Displays former recieving command till ACK
• Displays the protcol status of the unit.
4 Device ID is desplayed a name that sets by DEVID command of ISR
protocol.
Even if the power is turned off, this device ID is kept till it changes by
DEVID command.
5 Displays the number of the parity error (PE), framing error (FE), and overrun
error (OE) of receiving data.
6 The number with ( ) indicates the pin number of RS-232C connector.
The four figures (hexadecimal) at TXD or RXD indicates the number of
correctly transmitting or recieving data (byte).
Other items indicates the pin state with ON( > +3 V) or OFF( < –3 V).
When RS-232C port connects with computer &c., normally turns all ON.
When not connected, the state of input pins (CTS, DSR, DCD) are undefined.
Hardware control
XON/XOFF control
Both the hardware and XON/XOFF
transmitting is completed.)
A ; on ACK transmission
N ; on NAK transmission
T ; on ATN (OPC or QRESP) transmission
W ; waiting for ACK
X ; XOFF received, waiting for XON
5-4. Others Check Mode
OTHERS CHECK MODE
C42:RS-232C STATUS
*BAUD RATE
FLOW CONTROL
ISR
[
ID [DigiBeta-1
PE 00
FE 00
TXD(2)0000
RXD(3)0000
RTS(4)
ON
CTS(5)
DSR(6)
ON
DCD(8)
DTR(20) ON
Above screen is one example.
OTHERS CHECK MODE
C42:RS-232C STATUS
*BAUD RATE
19.2K
FLOW CONTROL
H/W
ISR
[
ID [DigiBeta-1
PE 00
FE 00
OE 00
TXD(2)0000
RXD(3)0000
RTS(4)
ON
CTS(5)
ON
DSR(6)
ON
DCD(8)
ON
DTR(20) ON
19.2K
H/W
]
]
OE 00
ON
ON
1
2
3
]
4
]
5
6
5-37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvw-522pBkdw-510Bkdw-511

Table of Contents