Technical Data - SaMASZ KT 261 Operation Manual

WARNING:
It is forbidden to use the mower for purposes other than those listed in this
instruction. Using the mower for other purposes will be classified as use not
according with the intended use and could exclude the manufacturer from
responsibility from any resulting damages. The mower should be used, serviced and
repaired only by persons familiar with its characteristics and with safety
regulations. Unauthorized modification of the mower may release the manufacturer
from responsibility for any resulting malfunctions or damages.

3.1. Technical data

1. The KT mowers can be generally divided into two groups:
mowers with hydro - pneumatic suspension
mowers with spring suspensions
2. The hydro – pneumatic suspension replaces the traditional springs which significantly improves
the comfort of mower operation. Thanks to this solution the operator can, using the hydraulic
system of the tractor quickly set the pressure of the cutterbar on the ground. Additionally this
system is integrated with the hydraulic safety device.
3. Emitted noise: up to 105 dB. Noise measured by noise meter from 1 m distance from
the machine in motion in final test area.
4. The technical specifications of the groups mentioned above are presented below.
Tab. 2a. Technical data – Rear disk mower with support springs (wide swath)
Mower type:
Mower type:
Mowing width
Number of blades [pcs]
Tractor PTO speed
Tractor power
Tractor class
Working capacity
Transport height
Transport width
Operating width
Articulated telescopic shaft with
unidirectional clutch
Line cutting speed
Disc rotational speed
Tab. 2b. Technical data – Rear disk mower with hydro-pneumatic support (wide swath)
Mower type:
Mower type:
Mowing width
Number of blades [pcs]
Tractor PTO speed
Tractor power
Tractor class
Working capacity
Transport height
Transport width
Operating width
Articulated telescopic shaft with
unidirectional clutch
Line cutting speed
Disc rotational speed
Operating manual
KT 261
2.60 m
12 (2 x 6)
50 kW (70 KM)
from 2.0
~ 2.8 ha/h
3100
2.0 m
4.7 m
1000 kg
KT 261 H
2.60 m
12 (2 x 6)
50 kW (70 KM)
od 2.0
~ 2.8 ha/h
3100
2.0 m
4.7 m
Rear disc mowers with central suspension
- with hydro-pneumatic or spring suspension
Standard
KT 301
Wide swath
3.00 m
14 (2 x 7)
1000 rpm
58 kW (80 KM)
from 2.0
~ 3.5 ha/h
3500
2.0 m
5.1 m
1060 kg
540 Nm
86.2 m/s
3078 rpm
Standard
KT 301 H
Wide swath
3.00 m
14 (2 x 7)
1000 rpm
58 kW (80 KM)
od 2.0
~ 3.5 ha/h
3500
2.0 m
5.1 m
540 Nm
86.2 m/s
3078 rpm
- 4 -
KT 341
3.40 m
16 (2 x 8)
65 kW (90 KM)
from 2.0
~ 4.0 ha/h
3900
2.0 m
5.5 m
KT 341 H
3.40 m
16 (2 x 8)
65 kW (90 KM)
od 2.0
~ 4.0 ha/h
3900
2.0 m
5.5 m