Basic Steps For Removing Rust Preventative; Placement Location - Craftex CX Series User Manual

Be patient and do a thorough job
cleaning your machine. The time you
spend doing this now will give you a
better appreciation for the proper care of
your machine's unpainted surfaces.
Basic steps for removing rust
preventative:
) Put on safety glasses.
1.
) Coat the rust preventative with a
2.
liberal amount of cleaner/degreaser, and
then let it soak for 5–10 minutes.
) Wipe off the surfaces. If your
3.
cleaner/degreaser is effective, the rust
preventative will wipe off easily. If you
have a plastic paint scraper, scrape off
as much as you can first, and then wipe
off the rest with the rag.
) Repeat Steps 2–3 as necessary until
4.
clean, then coat all unpainted surfaces
with a quality metal protectant to prevent
rust.
CAUTION
Avoid chlorine-based solvents, such as
acetone or brake parts cleaner, that may
damage painted surfaces.

Placement location

Workbench Load
Refer to the Machine Data Sheet for the
weight and footprint specifications of
your machine. Some workbenches may
require additional
support the weight of the machine and
workpiece materials.
Placement
Consider anticipated workpiece sizes
and additional
reinforcement
space needed
auxiliary stands, worktables, or other
machinery when establishing a location
for this machine in the shop. Below is
the minimum amount of space needed
for the machine.
to
for
6