Specifications - Altronix AL1012ULX Series Installation Manual

Altronix AL1012ULX is a power supply that converts a 115VAC, 60Hz input to a 12VDC output
(see specifications below).
The AL1012ULX is a base power supply unit for the UL Listed multi-output power supply/charger series:
AL1012ULXPD4, AL1012ULXPD4CB, AL1012ULXPD8, AL1012ULXPD8CB, AL1012ULXPD16,
AL1012ULXPD16CB (Refer to AL1012ULX Series Power Supply Configuration Reference Chart below).
AL1012ULX Series Power Supply Configuration Reference Chart:
Altronix
Model Number
AL1012ULX
AL1012ULXPD4
AL1012ULXPD4CB
AL1012ULXPD8
AL1012ULXPD8CB
AL1012ULXPD16
AL1012ULXPD16CB
*ANSI/UL 294 7th Ed. Access Control Performance Levels:
Destructive Attack - I; Endurance - IV; Line Security - I; Stand-by Power - I.
Stand-by: 15 minutes of Stand-by at 10A.
Input:
• Input 115VAC, 60Hz, 2.6A.
Output:
• 12VDC output.
• 10A total supply current at 12VDC.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
Supervision:
• AC fail supervision (form "C" contacts).
• Battery presence and low battery supervision
(form "C" contacts).
- 2 -
Accessory
Power
Distribution
Module(s)
– 1 –
PD4UL 4
P
PD4ULCB 4 –
PD8UL 8
P
PD8ULCB 8 –
Two (2)
16
P
PD8UL
Two (2)
16 –
PD8ULCB

Specifications:

Overview:
– 10
250V
– 3.5
250V
2.5
P
250V
– 3.5
250V
2.5
P
250V
– 3.5
250V
2.5
P
250V
Battery Backup:
• Maximum charge current 0.7A.
• Built-in charger for sealed lead acid or
gel type batteries.
• Automatic switch over to stand-by battery
when AC fails.
• Zero voltage drop when switched over to
battery backup.
LED Indicators:
• AC input and DC output LED indicators.
Additional Features:
• Power supply, enclosure, cam lock and
battery leads.
5A/ 15A/
32V
5A/ 15A/
32V
5A/ 15A/
32V
5A/ 15A/
32V
5A/ 15A/
LISTED
32V
5A/ 15A/
32V
5A/ 15A/
32V
UL Listings
and
File Numbers
UL File # BP6714
UL 294*
UL Listed for
Access Control
Systems.
––––––––
"Signal Equipment"
Evaluated to
CSA Standard
C22.2
No.205-M1983
AL1012ULX Series