Altronix AL1024X220 Series Installation Manual
Power supply/charger
Hide thumbs
Also See for AL1024X220 Series:
- Installation manual (9 pages) ,
- Installation manual (8 pages)
Table of Contents
Advertisement
Quick Links
AL1024X220 Series
Power Supply/Charger
Installation Guide
Models Include:
AL1024X220
- Single Output.
AL1024XPD4220
- Four (4) Fuse Protected Outputs.
AL1024XPD8220
- Eight (8) Fuse Protected Outputs.
AL1024XPD16220
- Sixteen (16) Fuse Protected Outputs.
For a red enclosure add an "R" suffix to the part #, e.g. AL1024XR220
Rev. 122905
www.a1securitycameras.com email: sales@a1securitycameras.com
Available from A1 Security Cameras
AL1024XPD4CB220
- Four (4) PTC Protected Outputs.
AL1024XPD8CB220
- Eight (8) PTC Protected Outputs.
AL1024XPD16CB220
- Sixteen (16) PTC Protected Outputs.
More than just power.
TM
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Altronix AL1024X220 Series
Summary of Contents for Altronix AL1024X220 Series
- Page 1 AL1024X220 Series Power Supply/Charger Installation Guide Models Include: AL1024X220 - Single Output. AL1024XPD4220 AL1024XPD4CB220 - Four (4) Fuse Protected Outputs. - Four (4) PTC Protected Outputs. AL1024XPD8220 AL1024XPD8CB220 - Eight (8) Fuse Protected Outputs. - Eight (8) PTC Protected Outputs.
-
Page 2: Specifications
Overview: Altronix AL1024X220 is a power supply that converts a nominal 220VAC (working range 198VAC-256VAC) 50/60Hz input to a 24VDC regulating output (see specifications). AL1024X220 is a base unit for a series of multi-output power supply/chargers including: AL1024XPD4220, AL1024XPD4CB220, AL1024XPD8220, AL1024XPD8CB220, AL1024XPD16220, AL1024XPD16CB220 (Refer to AL1024X220 Series Power Supply Configuration Reference Chart below). -
Page 3: Installation Instructions
Maximum charging current under discharges is 3.6A. Note: Expected battery life is 5 years; however, it is recommended changing batteries in 4 years or less if needed. AL1024X220 Series - 3 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... - Page 4 Stand-by Battery Stand-by Battery CAUTION: Optional rechargeable stand-by batteries must match the power supply output voltage setting. Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing. - 4 - AL1024X220 Series Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
-
Page 5: Led Diagnostics
Power Distribution Module Terminal Legend Function/Description PD4/PD4CB PD8/PD8CB 1P to 4P 1P to 8P Positive DC power outputs. 1N to 4N 1N to 8N Negative DC power outputs. AL1024X220 Series - 5 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... - Page 6 DC Output to devices From Power Supply From Power Supply Board Board 1P-8P Power Outputs, 1P-8P Power Outputs, (Factory Installed) (Factory Installed) 1N-8N Common Outputs 1N-8N Common Outputs - 6 - AL1024X220 Series Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
- Page 7 I*1.8 (safety factor) __________________ Note: AL1024X220 series power supply is designed to work with batteries up to 65AH. Please note: line [I] must not exceeds 36AH. You have to reduce either stand-by current consumption or stand-by time in order to comply with requirement.
- Page 8 (117.22mm) (38.1mm) Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. MEMBER IIAL1024X220 Series D24R...
Need help?
Do you have a question about the AL1024X220 Series and is the answer not in the manual?
Questions and answers