Network Module Data Area; Tag Names Area - Mitsubishi Electric MELSEC WS Series User Manual

Data sets
5.4.3

Network Module Data area

This area contains the routing table. It shows the current content of the CC-Link
interface module's input data modules. Bytes and bits highlighted blue will hold "live"
data from the system since the hardware configuration does support the source.
Bytes highlighted grey actually do not have data associated with them since the
hardware configuration does not support the sources.
How to delete a data byte from the routing table:
 Drag and drop the byte you want to delete to the trashcan icon in the bottom left
corner of the Network Module Data area.
Or:
 Select the byte you want to delete by clicking it with the left mouse button. Then,
click on the Delete routing button in the toolbar.
Or:
 Call up the context menu by clicking the respective byte with the right mouse
button. In the context menu, select the Delete routing command.
How to move a data byte to another place in the routing table:
 Drag and drop the byte you want to move to the desired position. If the desired
position is not free, you will have to clear it first by deleting or moving the byte
currently assigned to it.
5.4.4

Tag names area

This area shows the tag names associated with each bit of the byte currently
selected in the Available data or the Network Module Data area. You can enter
these tag names in the tag name editor.
In the Tag names area of the MELSEC-WS to CC-Link configuration dialog, you
can only edit tag names for unassigned data sets by activating the Use direct
editing checkbox (with CPU module firmware version V2.01 or higher).
MELSEC-WS
40