Saving And Loading A Configuration; Importing And Exporting A Configuration - Mitsubishi Electric MELSEC WS Series User Manual

Data sets
Figure 18:
Tag names of incoming
bits of the WS0-GCC1
in the logic editor dialog
Note
Each bit you enter a tag name for here will be available within the logic editor or for
the process image of a second network module:
5.6.1

Saving and loading a configuration

Using the buttons Load user configuration and Save user configuration you can
save and load your configuration in XML format. If you load a configuration, all
previously made changes that have not been saved will be lost. You can not undo
this action.
5.6.2

Importing and exporting a configuration

With the Import and Export buttons you can import and export a configuration
including the tag names used as a CSV (comma separated values) file. This allows
you to import and use tag names you have assigned in the MELSEC-WS safety
controller project in another programmable controller program and vice versa. To edit
the CSV file, use a text editor.
If you import a configuration, all previously made changes that have not been saved
will be lost. You can not undo this action.
The Import button is only available for the CC-Link to MELSEC-WS routing
configuration.
MELSEC-WS
44