MELSEC-WS
Figure 33:
Hardware configuration
dialog
59
9.3.1
Parameter configuration example
This section describes parameter configuration to output data from the WS0-GCC1
to the QJ61BT11N and to input data from the QJ61BT11N to the WS0-GCC1.
(1) Configuration required for the WS0-GCC1
The following shows the configuration example using the system configuration of
Figure 30.
1) Creating a hardware configuration
Read the hardware configuration data from the actual CPU module to Setting
and Monitoring Tool or place modules in Setting and Monitoring Tool according
to the actual configuration.
Preparing for operation