Extreme Networks ExtremeWireless AP360i ExtremeWireless AP360e Installation Manual page 39

GE and Console Connections
3. Attach the main body into the GE1 or GE2 port of the access point.
4. Plug the RJ45 cable into the port.
5. Slide the seal and the claw into the main body.
6. Secure the seal nut onto the main body.
7. Tighten the adapter assembly by hand to 5-in. lbs.
Caution
Do not run the network cable through the cable conduit connector used for connecting
the power cables. You must connect the network cable and power cables through
separate connectors.
Note
There should still be some visible threads after you torque in the cap.
Cable Gland Adapter Assembly
ExtremeWireless™ AP360i/e Access Points 39