CAME AGT A200 Manual page 10

Closing the Front Plate
To assemble the front plate fi rst insert the upper part into the top and then, with a 2.5 hex key, tighten the locking screw
Recessing side by side
To recess boxes side by side horizontally or vertically, remove the blanking plugs and insert the cable gland joints
The recessed boxes must be walled in fl ush with the wall at a suitable height, using the spacers provided in order to avoid any
distortion of the box .
Button assembly
To write the desired information on the name card, take out the
card holder and the card
Personalised name cards up to a maximum thickness of 2 mm
can be used.
.
.
.