Contents Of The Kit - CAME AGT A200 Manual

CONTENTS OF THE KIT

HA/200
A/200R
General precautions
Read the instructions carefully before staring installation and performing any procedures as explained by the manufacturer.
•
The installation, programming, commissioning and maintenance of the product must only be carried out by technicians who are
•
qualifi ed and properly trained in compliance with the regulations in force, including as regards health and safety, and disposal of
packaging.
The installer must ensure that the information for the user, where there is any, is provided and delivered.
•
Before carrying out any cleaning or maintenance, disconnect the devices from the power supply.
•
The equipment must only be used for the purpose for which it was expressly designed.
•
The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
•
Only use soft, dry or slightly damp cloths to clean the device. Do not use any chemical products.
•
These instructions must be attached to the device.
•
The product complies with the relevant directives in force.
Dismantling and disposal. Dispose of the packaging and the device responsibly at the end of its life cycle, in compliance with
the laws in force in the country where the product is used. The recyclable components are marked with a symbol and the material
ID marker.
THE DATA AND INFORMATION IN THIS MANUAL ARE SUBJECT TO CHANGE AT ANY TIME AND WITHOUT ANY ADVANCE WARNING.
UNLESS OTHERWISE INDICATED, MEASUREMENTS ARE GIVEN IN MILLIMETRES.
AGT A200
HBP
HTS
AGTK200A03
HPC/1
AGT2K200A03
HPC/2
AGTK200A03E
HPC/1