Function of buttons Adjustment of ringtone volume (high-medium-Off). Red LED on = ringtone off. Activation/Deactivation of communication. Blue LED on = active communication. Door lock release (blue LED). In systems designed to accommodate this signal, during a call from an entry panel, the permanently lit LED indicates that the door is open.
Standard functions Answering a call. Active communication. Opening the door of the entry panel that is calling. Ending the communication...
Page 4
Intercom Select the extension that you want to call; the line free tone indicates that the call has been forwarded. 3 successive beeps indicate that it is not possible to make calls because the line is busy. The receiver being called rings. Press the key on the receiver that is called to...
Call transfer With an active communication, select the extension you wish to transfer the call to; the line free tone indicates that the call has been forwarded. The receiver being called rings. Press the key on the receiver that is called to activate the communication.
Page 6
Call from concierge notification ☞ Function available only on systems with concierge's desk. An unanswered call from the concierge's desk is CALL ME marked by the Aux2 LED lighting up. The notification goes out when communication with the concierge begins. Request for call to concierge ☞...
Setting melodies ☞ All the programming stages described below must be carried out in sequence: beep 1- Going into Programming. Press button 5 times in 5 secs 1. A short beep confirms that you have entered programming mode. 2- Programming the melody associated with a call from the entry panel.
Page 8
CAME S.p.A. Via Martiri Della Libertà, 15 31030 Dosson di Casier - Treviso - Italy tel. (+39) 0422 4940 - fax. (+39) 0422 4941...