Problem: Magnet Valve Does Not Operate; Maintenance - OSTLING EMP/MODULMAT Operating Manual

Problem: Magnet valve does not operate

Check the following points:
•
•
Second fuse magnet valve is in the equipment. The equipment must be
opened!
Danger of electric shock.
5

Maintenance

Regular maintenance of the control is not necessary. With the occurrence of a
disturbance please contact our service department.
Note
Opening of the control without authorisation voids the warranty.
ÖSTLING Markiersysteme GmbH
Is the magnet valve fuse (13, Fig. 10009, page 11) on the backside of the
control in order?
Is the magnet valve fuse (1, Fig. 10014, page 15) on the transformer in
order? To check this, the equipment must be opened.
Check and change of the fuse must be done by an electrician.
Before opening the equipment pull the line cord.
B_EU_EMP_en.doc
Operation manual EMP
37