Query Of Service Data; Default Settings - OSTLING EMP/MODULMAT Operating Manual

Query of service data

In the menu "Service" important data for service technicians can be queried:
•
•
•
The information in the menu "Service" can be queried but not changed.
1. Open menu "Service".
2. Press ↓ (5).
3. Press ↓ (5).
4. Press MENU (7).

Default settings

By pressing MENU when switching on the equipment all settings are put back to
default setting:
Marking power
Marking time
Pumping time
Retarding time
Pulse marking
On periode
Off periode
DC/AC automatic
DC/AC time
DC/AC marking power
Current type
TIMER
AUTOMATIC (Output magnet valve)
PUMP (Connection pump)
File
Marking counter
Language
ÖSTLING Markiersysteme GmbH
Operating hours: shows how long MAIN SWITCH was ON.
Item counter: shows how many markings are done overall.
Net frequency: shows the active net frequency.
The operating hours of the equipment are displayed.
The total number of markings is displayed.
The active net frequency is displayed.
Menu selection appears.
MP 8.0
MT [s] 2.0
PT [s] off; 0.0
RT [s] off; 0.01
off
[s] 2.0
[s] 2.0
off
[s] 2.0
8.0
LED AC = on
LED DC = off
LED T = off
LED A = off
LED P = off
Werk
00000
German
B_EU_EMP_en.doc
Operation manual EMP
Tab. 6
33