Figure A-2. Add/Remove Programs Properties Dialog Box - National Instruments PC/104-GPIB Manual

© National Instruments Corporation

Figure A-2. Add/Remove Programs Properties Dialog Box

2. Select the GPIB software you want to remove and click on the
Add/Remove button. An uninstall program removes all folders,
programs, VxDs, DLLs, and registry entries associated with the
GPIB software.
If you have not physically removed your hardware, shut down
Windows 95, turn off your system, and remove the GPIB hardware.
The uninstall program removes only items that the GPIB setup program
installed. If you add anything to a directory that was created by the
GPIB setup program, the uninstall program does not delete that
directory, because the directory is not empty after the uninstallation.
You will need to remove any remaining components yourself.
If you want to reinstall the hardware and software later, refer to Chapter 2,
Installation and Configuration.
Appendix A Uninstalling the Hardware and Software
A-3 PC/104-GPIB for Windows 95