Figure 2-3. Add New Hardware Wizard Hardware Selection - National Instruments PC/104-GPIB Manual

© National Instruments Corporation

Figure 2-3. Add New Hardware Wizard Hardware Selection

6. Select the manufacturer and model of your hardware in the next
Add New Hardware Wizard dialog box. Select National
Instruments as the manufacturer and PC/104-GPIB as the model.
7. Click on the Next button to continue. Windows 95 attempts to
assign nonconflicting resources to the PC/104-GPIB.
If Windows 95 is able to assign resources successfully, the next
Add New Hardware Wizard dialog box describes the resources
assigned to the PC/104-GPIB, as shown in the example dialog box
in Figure 2-4. Skip to Step 8 to proceed.
Chapter 2
2-5
Installation and Configuration
PC/104-GPIB for Windows 95