8
1 PC/104-GPIB
2 GPIB connection
© National Instruments Corporation
3. Plug the PC/104-GPIB into the parent module. The PC/104 header
is keyed so that it fits in only one direction. Do not force the
PC/104 connector into place.
After the PC/104-GPIB has been plugged in, ensure proper contact
by gently pressing down at the PC/104 connector region of the
PC/104-GPIB until the module is level with respect to the parent
module.
4. Fasten the PC/104-GPIB to the standoffs with the provided
4-40 screws. Refer to Figure 2-14.
1
3 GPIB ribbon cable
4 Screw
Figure 2-14. Installing the PC/104-GPIB
Chapter 2
2
5
6
5 Standoff
6 Parent module
2-17
Installation and Configuration
3
4
7
7 PC/104 connector
8 PC/104 header
PC/104-GPIB for Windows 95