Table of Contents
Advertisement
2. Installation
To install the interface, first switch off the ignition and disconnect the vehicle's battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
The interface is supposed to be installed at a suitable location behind the vehicle`s head-
unit.
Model
A6
A8
e-tron
*Note: In the e-tron, the following hidden screw (Torx) must be loosened at the rear of the
centre console (one screw, the rest is inserted - ventilation doesn't have to be removed).
Version 29.10.2019
Location of the Head Unit
at the top behind glove box
behind the glove box
centre console under the ventilation for the rear
passengers*.
HW: CAM(V98)/UP(V20)
CI-RL4-MIB-TR
Advertisement
Table of Contents
