Table of Contents
Advertisement
2.3.3. Connection - Power
Connect the single yellow wire of the 10pin power/CAN cable to +12V permanent and
stabile power supply.
Connect the single black wire of the 10pin power/CAN cable to the vehicle's negative
ground.
Note: If, after connecting the 10pin Power / CAN cable, no interface LED lightens up while
the ignition is turned on, refer to chapter "Analogue power supply for the video interface".
Version 29.10.2019
HW: CAM(V98)/UP(V20)
CI-RL4-MIB-TR
Advertisement
Table of Contents
