Terminal Resistor Jumper Settings - ICP DAS USA PISO-CAN-FD Series User Manual

1.3.4.

Terminal Resistor Jumper Settings

The following provides a description of the resistor jumpers for the CAN Bus terminal
resistor, which can be used to enable or disable the terminal resistor of PISO-CANFD
series board.
Jumper Description
Used to enable or disable the 120Ω terminal
JP2
resistor for CAN Bus Port1.
Used to enable or disable the 120Ω terminal
JP3
resistor for CAN Bus Port2.
Used to enable or disable the 120Ω terminal
JP4
resistor for CAN Bus Port3.
Used to enable or disable the 120Ω terminal
JP5
resistor for CAN Bus Port4.
PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
Status
Page: 12
E-mail: service@icpdas.com