Jumper Settings - ICP DAS USA PCI-1002 Series User Manual

2.2 Jumper Settings

The PCI-1002 series has only one jumper. JP1 is used to select the analog input
type. For single-ended inputs, users should connected Pins 1-3 and Pins 2-4. For
differential inputs, Pins 3-5 and Pins 4-6 should be connected.
JP1
1
5
Single-ended
Inputs (Default)
Single-ended Input wiring as follows:
Wire the signal source to analog input channel 0(AI0) of CON3. The detailed
PCI-1002 series pin assignments information, refer to
Assignments.
CON3.AI0 (analog input channel 0)
CON3.A.GND (analog ground)
PCI-1002 Series User Manual (Ver.2.8, Oct. 2011, PMH-015-28)
2
1
5
6
Differential
Inputs
signal source (-)
JP1
2
6
section 2.8 Pin
signal source (+)
15