Device Led Button Behavior - Advantech EPD-023 User Manual

3.2

Device LED Button Behavior

3.2.1 EPD-023 button behaviors:
item Status
1 SW1 (P1) no press
2 SW2(P2) no press
3 SW3 (P3) no press
Press SW1(P1) &
4
SW3(P3)
If device loses con-
5 nection, press either
SW1\SW\SW3
3.2.2 EPD-023 LED behavior
Remote control commands from the gateway.
Item Status
1 LED1
2 LED2
3 LED3
EPD-023 User Manual
Action
Press button for 0.5 sec and
release button
Press button for 0.5 sec and
release button
Press button for 0.5 sec and
release button
Step1: Long press button (SW1 &
SW3) when LED1,LED2 and
LED3 off
Step2: LED2 flash (0.5 sec toggle
LED2)
after hold SW1& SW3 for 5 sec
Step3: LED2 on after hold SW1 &
SW3 for 10 sec
Step4: Release SW1 & SW3 keys
then LED2 off
Press and release button
Action
Remote Control by ePaper Manager API
(ePaper Manager
Remote Control by ePaper Manager API
Remote Control by ePaper Manager API
14
Result
Refresh EPD to Page 1
Refresh EPD to Page 2
Refresh EPD to Page 3
Reset to default and reboot
Note: All images and set-
tings in the device will be
deleted.
Leave sleep mode and try to
connect to a network
Result
On/Off/Blink
On/Off /Blink
On/Off/Blink