Mount The Transmitter - Emerson Rosemount 3051 Quick Start Manual

Quick Start Guide
Step 1: Mount the transmitter
Mounting in liquid flow applications
1. Place taps to the side of the line.
2. Mount beside or below the taps.
3. Mount the transmitter so that the drain/vent valves are oriented upward.
Figure 2. Liquid Flow Applications
Flow
A
A. Coplanar
B. In-line
Mounting in gas flow applications
1. Place taps in the top or side of the line.
2. Mount beside or above the taps.
Figure 3. Gas Flow Applications
Flow
A
A. Coplanar
B. In-line
Mounting in steam flow applications
1. Place taps to the side of the line.
2. Mount beside or below the taps.
3. Fill impulse lines with water.
Figure 4. Steam Flow Applications
Flow
A
A. Coplanar
B. In-line
4
B
B
B
May 2015