Store - Racal Instruments 1260 Series User Manual

1260 Series User Manual

STORE

Table 3-1, 1260 Option 01 Status Byte
Bit Number
1 (lsb)
2
3
4
5
6
7
8 (msb)
The Programming error bit cannot be masked, and so the range of
values for valid SRQMASKs is 32 - 63, 96 - 127, 160 - 191 and
223 - 255.
The power up (default) value of the SRQMASK is 40, i.e.,
programming error or Scanlist at break point will cause SRQ to be
asserted.
STORE <non-vol location>
1|2|.......|50
This command will store the present state of all switching modules
resident in the VXI chassis in the non-volatile memory location
specified.
A STORED configuration must be recalled into the same module
set as was stored. Any changes in module location will be
disregarded as long as the same module types are at the same
module addresses as were stored.
Description
Unused
Unused
Unused
Scan List At Break Point
Ready
Programming Error
Service Requested
Unused
where <non-vol location> =
Operation 3-15