Excl; Open - Racal Instruments 1260 Series User Manual

EXCL

OPEN

Operation 3-6
EXCL <exclude list>
This command causes the Option 01 to regard the channel
closures specified in the <exclude list> as mutually exclusive. A
channel is described in the <exclude list> by the slot number of a
switching module and module specific syntax to describe the relay
closures in a channel. Refer to the individual module sections for
the module specific syntax of the various switching modules
available. More than one <exclude list> may be specified in an
EXCL statement by separating the Exclude groups with the letter E
and a semi-colon (E;). Continuous groups of modules may be
entered onto the <exclude list> by entering the first and last
modules to appear on the list joined by a hyphen (-).
Use of the EXCL command will overwrite all
previously entered <exclude list>s. An <exclude list>
of 0 may be used to clear all exclude groups.
OPEN <module address>.<module specific syntax> [;<module
address>
.<module specific syntax>].....
This command causes one or more connections on a switching
module to open. Any number of connections in more than one slot
may be opened in one OPEN statement if the <module
address>.<module specific syntax> sections are concatenated
using a semi-colon (;). Refer to the individual module sections for
the <module specific syntax> to be used for each switching
module.
1260 Series User Manual
NOTE