Copy Data Via Usb; Windows 98Se - AL Tech Mediagate MG-35 Manual

1.3 Copy Data via USB

It is possible to use as a external USB hard disk drive in case of inserting hard disk into MG-35. You can copy data
from your PC to built-in HDD of MG-35 via USB. It is possible to play media files at the hard disk on TV set.
* When connecting PC, you have to connect power cable of MG-35.

1.3.1 Windows 98SE

First, you have to install Windows 98 Driver before connecting PC. Find the driver at Windows 98 driver CD→MediaGate MG-
35→English→Windows 98 Driver Directory. After finishing installation, Connect MG-35 to PC via USB cable, and plug power
cable of MG-35.
1) After installing the driver, connect mg-35 and plug
power cable. And then, check the driver installation at
Windows [Start→Settings→Control Panel→System
→Device Manager→Hard disk controllers→Hi-
Speed USB-IDE Bridge Controller].
2) Check 'My Computer' or 'Explorer', there should be
a new volume. You can copy any data to this volume.
If a new volume is not be appeared, check HDD format
or not, and HDD file system. Windows 98SE only detect
FAT32 file system.
3) After copying data, remove MG-35 with using
remove icon at Windows right-down corner. If
you don't follow this procedure, data and MG-35 may
have damage.
14