Format Built-In Hdd Via Usb; Windows 98Se, Me - AL Tech Mediagate MG-250HD Manual

1.2 Formatting a Built-in HDD via USB
If the built-in HDD is not formatted, the PC can not detect the hard disk drive. Refer to the below procedure for how to do a HDD format..
* If the hard disk drive is al ready formatted, see "1.3 Copy Data via USB."

1.2.1 Windows 98SE, ME

1) Install the Windows 98 Driver first.
Find the driver in Windows 98 CD>MediaGate MG-250HD
> English > Windows 98 Driver Directory.
After the Windows98 driver installation, connect the MG-250HD to
PC via USB cable, and plug the power cable into MG-250HD, if it
is required.
2) Select [Start→Program→Accessories→MS-DOS
Prompt] on Windows.
3) Type "fdisk" command at Command Prompt window
and press [Enter].
4) Type a "Y" at the "Do you wish to enable large disk."
support (Y/N)" and press [Enter].
5) Select "5. Change current fixed disk drive" and press
[Enter].
6) Type the last Disk number in 0% usage.
7) Select "1. Create DOS partition or Logical DOS Drive"
and press [Enter].
12