Format Built-In Hdd Via Usb; Windows 98Se, Me - AL Tech Mediagate MG-45 Manual

1.2 Format Built-in HDD via USB

1.2 Format Built-in HDD via USB
If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the If the built-in HDD is not formatted, PC can not detect the hard disk drive. If so, format the hard disk first referring to the
following guide. * If the hard disk drive is al ready formatted, see "1.3 Copy Data via USB."

1.2.1 Windows 98SE, ME

1) Install the Windows 98 Driver. Find the driver on
the Windows 98 CD→MediaGate MG-45→English→
Windows 98 Driver Directory. After finishing
installation, connect the MG-45 to a PC via USB cable,
and plug in the power cable of the MG-45.
2) Select [Start→Program→Accessories→MS-
DOS Prompt] on Windows.
3) Type "fdisk" command at Command Prompt
window and press [Enter].
4) Type the "Y" at the "Do you wish to enable large
disk support (Y/N)" message and press [Enter].
5) Select "5. Change current fixed disk drive" and
press [Enter].
6) Type the last Disk number in 0% usage.
7) Select "1. Create DOS partition or Logical DOS
Drive" and press [Enter].
8