Table of Contents
Advertisement
Quick Links
`
Fits
2011-2016
Chevrolet Silverado/GMC Sierra 2500/3500
:
ASSISTANCE IS RECOMMENDED.
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT.
READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
DO NOT OVER TORQUE. STANDARD OPERATING LOAD FOR TIGHTEN
BODY MOUNT NUTS & BOLTS VARIES FROM 45 TO 65 FOOT POUND.
Qty
1
3.5in Oval Bull Bar Assembly
1
Driver/left Frame Bracket
1
Passenger/Right Frame Bracket
1
Driver/left Bull Bar Mounting Bracket
1
Passenger/right Bull Bar Mounting Bracket
4
12-1.75mm x 35mm Bolt Plates
Passenger/right Side
Frame Bracket
Passenger/right Side
Bull Bar Bracket
Page 1 of 5
3.5" Oval Bull Bar
Part No. B1603S/B
Part Description
PARTS LIST:
Qty
4
12mm Plastic Retainers
4
12mm x 32mm OD x 3mm Flat Washer
4
12-1.75mm Nylon Lock Nut
8
10-1.5mm x 30mm Hex Bolt
16
10mm x 27mm OD x 3mm Flat Washer
8
10-1.5mm Nylon Locknut
Driver/left Side
Frame Bracket
(4) 12mm Bolt Plates
with Plastic Retainer
Cutting
60-180 min
Required
Part Description
Driver/left Side
Bull Bar Bracket
Drilling Not
Required
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for TrailFX B1603S
Summary of Contents for TrailFX B1603S
- Page 1 3.5" Oval Bull Bar Part No. B1603S/B Fits 2011-2016 Chevrolet Silverado/GMC Sierra 2500/3500 ASSISTANCE IS RECOMMENDED. Cutting Drilling Not 60-180 min Required Required REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. DO NOT OVER TORQUE. STANDARD OPERATING LOAD FOR TIGHTEN BODY MOUNT NUTS &...
- Page 2 INSTALLATION PROCEDURE: CUTTING MAY BE REQUIRED. INSTALLATION MAY INTERFERE WITH BUMPER MOUNTED PARKING SENSORS. ASSISTANCE IS RECOMMENDED. NOTE: It may be necessary to remove/relocate front license plate and license plate bracket. It is not required, but strongly recommended. If local/state law requires a front license plate, license plate relocation kit is available.
- Page 3 (2) 12mm Flat Washers (2) 12mm Bolt Plates (2) 12mm Nylon Lock Nuts (2) 12mm Plastic Retainers (use is optional) (Fig 5) Attach driver/left Frame Bracket to 12mm Bolt Plates in end of frame 3. Select the driver side Frame Bracket, (Figure 5). Position the Frame Bracket onto the outside of the frame channel and over the (2) Bolt Plates, (Figure 6).
- Page 4 (2) 10mm x 30mm Hex Bolts (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts (Fig 7) Attach driver/left Bull Bar Bracket to inside of Frame Bracket 5. Starting at the bottom of the frame, tighten the lower 12mm Frame Bracket mounting hardware first then move to the side of the frame.
- Page 5 Ensure make model year, cab length and bed size of your vehicle is listed in the application. All installation steps are followed correctly. Check out these other TrailFX Products!! Keystone Automotive Operations Inc. (KAO) warrants this product to be free of defects in material and workmanship at the time of purchase by the original retail consumer.
Need help?
Do you have a question about the B1603S and is the answer not in the manual?
Questions and answers