3Com IntelliJack NJ225 User Manual page 16

12 C 1: I
HAPTER NSTALLING THE
Connecting Devices to
the NJ225
I J
NTELLI ACK
Once the power source and the data source have been verified in good working
order and the IntelliJack has been installed and mounted, connect your
networking devices (such as computers, printers, IP phones, cameras, etc.) to the
IntelliJack.
The IntelliJack has two ways to connect devices:
1 RJ-45 Personal Area Network (PAN) Ports — any of the four switched ports on the
bottom of the IntelliJack. All ports feature 10/100 Mbps auto-negotiation, which
configures the NJ225 IntelliJack for 10 Mbps or 100 Mbps connections automatically.
2 Pass-through port—a single pass-through port is provided that allows an additional
device to be connected to a separate network segment through the same IntelliJack.
The data or voice traffic that travels through the pass-through port, passes through
the IntelliJack without being switched.