Sing The Central Configuration Manager; Discovering Intellijacks On Your Network - 3Com IntelliJack NJ225 User Manual

4
Discovering
IntelliJacks on Your
Network
U
SING THE
C C
ENTRAL
You should use the Local Configuration Manager to initialize each of the
IntelliJacks installed on your network. Once you have completed that step, you can
manage all of them with the Central Configuration Manager.
NOTE: The instructions in this section apply to both the NJ225 and NJ225FX
unless otherwise noted. In this section, the terms "IntelliJack" and "NJ225" refer
to either the NJ225 or the NJ225FX.
Install this program on any computer on your network you want to use as a
central management console (See chapter 2, "Installing the Configuration
Managers" for help). You can use the same machine that has your SNMP-based
management platform. The Central Configuration Manager will be able to
configure and manage all of the IntelliJacks that reside on your network.
We recommend that you keep the Central Configuration Manager (CCM) running
on your machine. Information such as traps and alerts are sent to the CCM on a
periodic basis. If you shut off the machine or close the configuration manager, you
will not be able to receive this information.
In order to manage the IntelliJacks on your network, the Central Configuration
Manager needs to include them in its database. The easiest way to add new
IntelliJacks to the database is to use the device discovery tool included in the
Central Configuration Manager.
The first time you run the Central Configuration Manager, it will automatically
take you to the Discovery window as shown under step two below. To discover
new devices on your network, run the following steps:
ONFIGURATION
M
ANAGER