3Com IntelliJack NJ225 User Manual page 66

62 C 4: U
HAPTER SING THE
C C M
ENTRAL ONFIGURATION ANAGER
Global Setting
Power Forward
Local Configuration
SNMP SET
SNMP Traps
Event Alert
ATU Table
VTU Table
All RADIUS settings
802.1X Supplicant Status
802.1X Supplicant User Name and
Password
Port Setting
State
Link
Flow Control
MDI[X]
Multicast Limit
Priority Lookup
Port Priority
VLAN ID
802.1Q VLAN Mode
Data Rate Limit
Maximum Data Rate
The values that remain unchanged when you click Restore Base Configuration are:
• Group Name
• Location Name
• Password
• IP Address
• DHCP Settings
• SNMP Get, Set, and Trap Community Strings
• SNMP Trap Destination IP Address
• Subnet Mask
• Gateway
• Device Log (stored in EEPROM)
• Management Port VID
Default Value
Auto detection
Enable
Enable
Disabled
Level 2
Blank
Blank
Blank
Disabled
Blank
Default Value
Forwarding
Auto negotiation
Off
Force MDI
3%
Tag & IPV4
0 or 1
1
Disable VLANs
All frames
No limit