6
6.1.1
When using the ADF
1
Press the Scan key.
The machine switches to the scan mode.
2
Load the original onto the ADF.
% The maximum number of originals that can be placed at one time into the ADF is 70. Do not set orig-
inals above the
% For details on the setting direction of the original, refer to [User's Guide Copy].
% For details on how to set a double-sided original, refer to page 6-5.
3
Specify a destination.
% Address book can be used to select the destination. For details, refer to page 6-10.
% Speed dial can be used to select the destination. For details, refer to page 6-9.
4
Press the OK key.
The destination is displayed.
% By pressing the , key, the file format and transmission settings for the compression coding method
can be changed. For details, refer to page 6-7.
5
Press the Start key.
Scanning/sending starts.
Tips
-
To stop scanning, press the Clear/Stop key.
-
If you are unable to send data, the TX Result Report is output.
d
Reference
To cancel transmission of scanned data while standing by for transmission, press the Function key and select
[CANCEL RESERV.]. For details, refer to [User's Guide Fax].
6-4
mark.
Basic transmission method
6.1
bizhub 225i