When Setting An Original On The Original Glass - Konica Minolta bizhub 225i User Manual

5
5.1.2

When setting an original on the Original Glass

1
Press the Scan key.
The machine switches to the scan mode.
2
Set the original onto the Original Glass.
% For details on how to set the original, refer to [User's Guide Copy].
3
Enter the E-mail address of the destination.
% A maximum of 64 characters can be entered.
% Pressing the , key enables the subject, CC address, file format, and compression coding method
to be changed. For details, refer to page 5-8.
% The destination may be specified by the following method.
% One-touch Dial can be used to select the destination. For details, refer to page 5-17.
% Speed dial can be used to select the destination. For details, refer to page 5-18.
% Address book can be used to select the destination. For details, refer to page 5-20.
4
Press the Start key.
5
Use the +/, key to select [AUTO DETECTION] or [MANUAL].
% If [AUTO DETECTION] is selected, press the OK key and go to Step 8.
% If [MANUAL] is selected, scanning size can be selected. Press the ) key and go to Step 6.
6
Use the +/, key to select desired scanning size, then press the OK key.
% By pressing [INCH] or [METRIC], the measuring scanning size can be changed.
7
Press the OK key.
5-6
150dpiBW TIFF 100%
TEXT/PHOTO
TO:
OTHER SETTING=,
Basic transmission method
AUTO
5.1
bizhub 225i