Show Ipx Network <Network_Name> Counters; Show Ipx Network <Network_Name> Settings - 3Com OfficeConnect 3CP4144 Cli User's Manual
3com officeconnect 3cp4144: users guide
Hide thumbs
Also See for OfficeConnect 3CP4144:
- Get started manual (58 pages) ,
- How to set up (4 pages) ,
- Release note (2 pages)
Table of Contents
Advertisement
show ipx network
<network_name>
counters
show ipx network
<network_name>
settings
INPUT COUNTERS
Total Packets Received - sum of IPX packets received
Header Errors - sum of incoming packets discarded due to errors in their
headers, including any IPX packet sized less than a minimum of 30 bytes
Unknown Sockets - sum of incoming packets discarded because the
destination socket was not open
Discarded - sum of incoming packets discarded due to reasons other than
those accounted for by Header Errors, and Unknown Sockets
Checksum Errors - sum of IPX packets received with wrong checksums
Delivered Locally - sum of IPX packets delivered locally, including packets
from local applications
No Route to Destination - number of times no route to a destination was
found
Too Many Hops - sum of incoming packets discarded for exceeding the
hop count
Filtered Out - sum of incoming packets filtered out
Decompression Errors - sum of incoming packets discarded due to
compression errors
OUTPUT COUNTERS
Total Packets Transmitted - sum of IPX packets transmitted
Forwarded Packets - sum of IPX packets forwarded
Local Transmits - sum of IPX packets transmitted to local hosts
Local Malformed Transmits -
Discarded - sum of outgoing packets discarded
Filtered Out - sum of packets filtered out before transmission
Compression Errors - sum of outgoing packets discarded due to
compression errors
Socket Open Failures - sum of outgoing packets discarded because a
socket was not available
Displays statistics for the specified IPX network.
RIP Out Packets - sum of RIP packets transmitted
RIP In Packets - sum of RIP packets received
SAP Out Packets - sum of SAP packets transmitted
SAP In Packets - sum of SAP packets received
Displays parameter settings for the specified IPX network. You can modify most of
these values using the set ipx network command.
Interface - interface this IPX network uses
Network Address - network address of this IPX network
CLI Commands
B-45
Advertisement
Table of Contents
