Quick Setup; Cli Quick Setup Script; Introduction; Instructions - 3Com OfficeConnect 3CP4144 Cli User's Manual

4
CLI Quick Setup
Script

Introduction

Instructions

Setup Script

Q S
UICK ETUP
This chapter will describe in detail the operations of the Quick Setup program. It
will identify the required information, steps involved, and sample output scripts
from the execution of this program.
The CLI Quick Setup program allows you to quickly configure LAN-side, global and
management settings for your OfficeConnect Remote 812. Instead of using
cryptic commands, you will simply respond to a series of questions regarding
different aspects of your configuration. The program will convert your responses
into the appropriate CLI commands and execute them.
The CLI Quick Setup program automatically executes when the OfficeConnect
Remote 812 is powered on with no configuration and all DIP switches in the back
of the unit are in the OFF position. This boot mode is called Unconfigured Mode.
An OfficeConnect Remote 812 unit can be restored to an unconfigured state by
ensuring that all DIP switches are in the OFF position and by deleting the
configuration by performing one of the following:
1 Press the Configuration reset button on the back of the unit while powering on.
2 Issue the delete configuration command from the CLI.
3 Use the browser-based OfficeConnect Remote 812 Manager to delete the
configuration.
For more information on the OfficeConnect Remote 812 boot modes see Chapter
2: Getting Started in the OfficeConnectRemote 812 ADSL Router Install Guide.
The following sections contain the CLI Quick Setup script. You will be required to
enter information concerning your network configuration. Questions in the script
are presented here in tables. Write the appropriate information for your desired
configuration in the following tables.
The OfficeConnect Remote 812 Quick Setup will let you set up LAN-side and
global configuration for your system.To configure wide-area profiles you should
run the OfficeConnect Remote 812 VC Wizard using the QUICKVC command.
Do you want to continue with OfficeConnect Remote 812 Quick Setup?