Running The Setup Wizard - 3Com OfficeConnect 3CRWDR101A-75 Installation Manual

8

Running the Setup Wizard

4. RUNNING THE SETUP WIZARD
Connecting to
the Internet
1. If you have not already done so, restart your computer.
2. Launch your Web browser and try to connect to the Router by typing the
following URL in the address or location bar: http://192.168.1.1. If you
can access the login page, then your computer has correctly received an IP
address from the Router.
3. Log in using the default password <admin>. The Wizard will attempt to
launch automaticallyIf it fails, select Wizard from the menu.
Where possible, the Wizard will recommend settings for most parameters.
However, there are some settings that you must provide. Most of these will
have been provided to you by your ISP when you set your account up.
When the Wizard has completed, attempt to browse to an Internet Web site,
such as www.3com.com. If you can successfully access this site, then you
computer and Router have been configured correctly.