Amax-50Xx Ethercat I/O Modules - Advantech AMAX-5580 User Manual

2.2.2

AMAX-50XX EtherCAT I/O Modules

The right-hand side of AMAX-5580 is the interface for the EtherCAT Slice IO mod-
ules. Below is the table for the current supported IO modules:
Table 2.4: List of AMAX-50XX series extension modules
No.
1
2
3
4
5
6
7
8
9
10
11
Model
AMAX-5001
AMAX-5015
AMAX-5017V
AMAX-5017C
AMAX-5018
AMAX-5024
AMAX-5051
AMAX-5052
AMAX-5056
AMAX-5056SO
AMAX-5057
Description
Power Input Module with 4-ch Digital
Input
-24VDC power input for Slice IO*
-Abnormal Voltage detection
-4DI / Wet Contact
*This should be the first module to start
the right hand side slice IO after AMAX-
5580. It can also be added between
AMAX-50XX modules to provide extra
power.
4-Ch RTD input module
-2 or 3 wire RTD sensor
-Pt100, Pt1000, Balco500, Ni518
-100Hz sample rate per channel
6-Ch Voltage Input Module
-Voltage Input
-16-bit resolution
-100Hz sample rate per channel
6-Ch Current Input Module
-Current Input
-16-bit resolution
-100Hz sample rate per channel
-Support wire burn-out detection
6-Ch Thermocouple Input Module
-Type J/K/T/E/R/S/B
-16-bit resolution
-100Hz sample rate per channel
-Support wire burn-out detection
4-Ch Analogue Output Module
-Voltage and Current
-16-bit resolution
-Fail-safe value output
8-Ch Isolated Digital Input Module
-DI Voltage: 10~30VDC
-Filter : 3ms
16-Ch Isolated Digital Input Module
-DI Voltage: 10~30VDC
-Filter : 3ms
8-Ch Isolated Digital Output Module
-Sink Type
-DO Voltage: 10~30VDC
8-Ch Isolated Digital Output Module
-Source Type
-DO Voltage: 10~30VDC
16-Ch Isolated Digital Output Module
-Sink Type
-DO Voltage: 10~30VDC
11 AMAX-5580 User Manual