Install Main Unit And Modules; I/O Slots And I/O Channel Numbering - Advantech ADAM-5550KW Series User Manual

2.2.3

Install Main Unit and Modules

While inserting modules into the system, align the PC board of the
module with the grooves on the top and bottom of the system. Push
the module straight into the system until it is firmly seated in the
backplane connector. Once the module is inserted into the system,
push in the retaining clips (located at the top and bottom of the module)
to firmly secure the module to the system.
Figure 2-2 Module installation for ADAM-5550KW Series
2.2.4

I/O Slots and I/O Channel Numbering

The ADAM-5550KW Series provides 8 slots for I/O modules. The I/O
slots are numbered 0 through 7, and the channel numbering of any
I/O module in any slot starts from 0. For example, the ADAM-5017 is
an 8-channel analog input module. Its input channel numbering is 0
through 7.
Chapter 2 Installation Guidelines
ADAM-5550KW Series User's Manual 2-11