Flat Field Correction Control - Omron FS-C4KU7DGES-F Product Specifications And User's Manual

Name
GevSCDA [GevStreamChannelSelector]
GevSCSP [GevStreamChannelSelector]
GevSCFTD
11.17

Flat Field Correction Control

Name
FFCOffsetMode
FFCGainMode
FFCOffsetTarget
FFCGainTarget
FFCStatusAll
FFCSetSelector
FFCSetLoad [FFCSetSelector]
FFCSetSave [FFCSetSelector]
FFCSetDefault
FS-C4KU7DGES-F / FS-C4KU7DGES-M42 / FS-C2KU7DGES-F / FS-C2KU7DGES-M42 / FS-C2KU7DGES-C
Product Specifications and Use's Guide
Description
Controls the destination IP address of the selected stream channel to
which a GVSP transmitter must send data stream or the destination IP
address from which a GVSP receiver may receive data stream.
Indicates the source port of the stream channel.
Controls the delay (in GEV timestamp counter unit) to insert between
each packet for this stream channel.
Description
Controls if the selected FFCOffset is active.
Controls if the selected FFCGain is active.
Sets the value of the target offset level for Once mode.
Sets the value of the target gain level for Once mode.
Returns the FFC status all.
Selects the feature FFC Set to load, save or configure.
Loads the FFC Set specified by FFCSetSelector to the device and
makes it active.
Save the FFC Set specified by FFCSetSelector to the non-volatile
memory of the device.
Selects the feature FFC Set to load and make active by default when
the device is reset.
No.20S046-00
60/62