Power Options; Internal Battery - Bartec Syscom MR3000 Series User Manual

34
Status tab (for all the details please refer to Section 5.2) should be open to check:
1) The status of the supply power;
The free space on the SD card and its lifetime;
2)
Now the unit is operational.
4.2

Power Options

The MR3000SB can be powered in different modes:

Simply by the battery, for about 40 hours.

AC power (100-240 VAC, 50-60 Hz).

DC power (10-36 V)
4.2.1.

Internal Battery

The battery capacity is 12 Ah, with a voltage of 12 V, and its autonomy can vary depending on the
hardware and service settings you are using. Usually, it lasts about 40 hours.
The battery must be intended as a supplementary power in case of main power interruption.
The consumption of the MR3000SB is:
4 W in case of charged battery, FO mode
•
25 W in case of AC max, with battery in charge
•
The autonomy of the SB is about 40 hours.
Figure 4.1.11. Screen dedicated to the status of the MR3000SB.