Safety Instructions - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Safety instructions

3 Safety instructions
Please check whether or not these instructions correspond to the device type.
Please adhere to all advice given in these operating instructions. They include basic infor-
mation which needs to be observed during installation, operation and maintenance. Therefore,
it is vital for the technician and the responsible operator/qualified personnel to read these oper-
ating instructions prior to installation, start-up and maintenance.
The operating instructions must be accessible at all times at the place of application of the
METPOINT
lations need to be observed, where required.
If you have any queries regarding these instructions or the device, please contact the
manufacturer.
Danger!
Supply voltage!
The contact with non-insulated parts carrying supply voltage involves the risk of an electric
shock resulting in severe injuries and death.
Measures:
•
Observe all regulations in effect during the electrical installation (e.g. VDE 0100)!
•
Maintenance works must only be carried out when the system is de-energized!
•
Any electrical works must only be carried out by authorised and skilled personnel.
Danger!
Inadmissible operating parameters!
Under-running or exceeding the limit values involves risks for persons and the material, and
malfunction and service failures may occur.
Measures:
•
Make sure that the METPOINT
that are indicated on the type plate.
•
Exact compliance with the performance data of the METPOINT
case of application.
•
Do not exceed the permissible storage and transport temperature.
Further safety advice:
•
During installation and operation, the national regulations and safety instructions in force also need to
be observed.
•
®
The METPOINT BDL portable must not be employed in hazardous areas.
Additional instructions:
•
Do not overheat the device!
•
®
The METPOINT BDL portable must not be disassembled!
Caution!
Malfunctions of the METPOINT
Through incorrect installation and insufficient maintenance, malfunctions of the METPOINT
BDL portable may occur. These can affect the indications and lead to misinterpretations.
6
®
BDL portable. In addition to these operating instructions, local and national regu-
®
BDL portable is operated only within the permissible limit values
®
BDL portable
®
BDL portable in connection with the
®
METPOINT
®
BDL portable