Beko METPOINT BDL portable Instructions For Installation And Operation Manual page 48

Operation METPOINT® BDL portable
Fifth step: define the register
Main menu  Settings  Sensor settings  A1  Va  Use
Sixth step: enter the Modbus parameters
The following parameters can be retrieved via the corresponding registers:
Register Designation
Va Temperature
Vb Rel. humidity
Vc Dew/freezing point
Vd Dew point
VALUES FOR THE MONITOR SENSOR.
48
The definition of other registers is implement-
ed in the same manner.
The settings of the reg./data format are the
same for all the registers.
The entry of the Modbus parameters is imple-
mented via the white buttons (1) – (4).
Address register Reg. format
1216 [HR] R4
1152 [HR] R4
1536 [HR] R4
1472 [HR] R4
Unit Scal.
°C No scal.
% rH No scal.
°Ctd No scal.
°Ctd No scal.
®
METPOINT BDL portable