Advanced Settings (Scaling Analogue Output) - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Operation METPOINT® BDL portable

12.3.2.2.1.3 Advanced settings (scaling analogue output)

Main menu  Settings  Sensor settings  C1  Right arrow (2
m³/h
200.000
The settings are completed by means of the
Note:
After having confirmed by
accepted.
32
293.0
1000.0
110.0
293.0
1000.0
110.0
OK
OK, the lettering is switched to black again. The values and settings have been
page)  Advanced settings
nd
In the advanced settings,
mined whether the 4-20 mA analogue output
of the sensor should be based on the flow
volume or on the velocity.
The text field with a green background was
chosen!
In addition, the measuring range can be set
by pressing the scaling manual
After the confirmation with
are accepted.
Note:
The advanced setting
BEKO digital.
buttons!
it can be deter-
button.
OK, the settings
is only available for
®
METPOINT BDL portable