Installation; Line Cross-Sections - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Installation

10 Installation
NOTE!
The plug of the power supply unit (charger) is used as a separator.
This separator must be clearly recognizable and easily accessible by the user. A plug connector
with a CEE7/7 system is necessary.
NOTE!
Only use the included type GE12I12-P1J power supply unit.

10.1 Line cross-sections

For the sensor connections/output signals, the following line cross-section needs to be used:
AWG16 – AWG28, line cross-sections 0.14 – 1.5 mm
12
2
®
METPOINT BDL portable